SMC

SMC Canada

As the world’s leader in pneumatic products, SMC has ancillary products to support all of their main lines. AWT stocks many of these additional items. Whether it is a dryer you need or tubing, we have it. SMC : Official Website
 

 
 
AC Air Filters, Pressure regs, FRL's
SMC’s air preparation (FRL) products offer a wide variety of filter, regulator, and lubricator combination units as well as ambient dryers, booster regulators, mist separators, and a wide range of accessories. Obtain energy savings, with higher flow rates and eight size options to ensure optimum performance for every application. Cleaner environment with small Micron Filtration as standard to meet every application need. Reduced downtime with simple assembly and maintenance. Integrate electronic pressure switches, lock out valves and “soft starts” for complete control over your pneumatic supply.

Open PDF
 
AS Speed Controllers
SMC speed controllers have a broad range of applications and specialty focus such as flow control use at low speed, and with residual pressure. Further options within the series include a built in one-touch fitting, an integrated pilot check valve, a meter-in and meter-out dual flow control, a stainless steel option. With the ASR series, the environmentally conscious consumer can reduce air consumption by 25% through the inclusion of a quick supply exhaust valve.

Open PDF
 
IDFB Refrigerated Dryer
IDF refrigerated air dryers feature compact and quiet construction, a stainless steel heat exchanger, ozone friendly refrigerants, and a very low pressure drop. Constructed to be in compliance with the Montreal Protocol Regulations, the IDF uses refrigerants R134a and R407C (R22) to prevent any damage to the earth’s ozone layer and can accommodate an inlet temperature of 104°F.

Open PDF
 
NCA1 Cylinders
Series NCA1 medium duty tie rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles. Bore sizes range from 1.5 to 4 inches. The NCA1 expanded line of medium duty cylinders has bore sizes ranging from 5 to 8 inches, while the heavy duty range is 1.5 to 14 inches. The single rod model is available in 22 mounting styles.

Open PDF
 
NCG / CG1 Cylinders
AWT stocks basic linear air cylinders which are used to provide straight-line, in/out linear movement for a variety of applications. Basic air cylinders are available as single-acting and double-acting with single or double rod and non-rotating models. Body styles include crimped, round, or tie rod. Single-acting cylinders develop thrust in one direction and have lower air consumption compared with the equivalent size of double-acting cylinders. With a double-acting cylinder, air pressure may be alternately applied to provide force in both directions. See our link to basic linear actuators on SMC.

Open PDF
 
NCM Stainless Cylinders
NCM stainless steel cylinder now available in 7/16″ and 9/16″ bores as well as 3/4″, 7/8″, 1 1/16″, 1 1/4″, 1 1/2″, 2″ bore sizes. Mounting options include front nose mount, rear pivot mount, double end mount, block mount, foot mount. Options include high temp, low temp, low friction, stainless steel rod, rod boot, rubber cushion.

Open PDF
 
 
 
 
 
 
 
 

SMC Cylinders

Whether it is custom designed and fabricated cylinders you need, or off the shelf standards, AWT can deliver. As the largest stocking distributor for SMC in Canada or our more than 25 year history of delivering SMC products, we either have what you need on the shelf, or can get it quickly.
 

 
 
Air Cylinder Overview
SMC actuators offer the most innovative designs in the industry. Specified in all major industrial markets, they are created to provide you with the largest array of choices. From Semi Conductors to Automotive, Packaging to Medical, Food to Heavy Vehicles SMC is the first choice of engineers around the world. Our standard features include a wide range of 16 inch and 18 metric bore sizes, multiple mounting configurations and auto switch capability as a standard on most series.SMC have designed and built actuators for high precision performance, and exceptional reliability.

View more Info
 
CA2 Cylinders
SMC’s Metric Tie-Rod Cylinder , designed with reduced weight and improved cushioning capability. Compared with the CA1 series, is able to absorb 30% more Kinetic energy at the maximum. Piston rod deflection is reduced by the improved accuracy of bushing and piston rod, which minimizes the clearance between the components.

Open PDF
 
CP95 Cylinders
SMC Profile Design ISO/VDMA Double Acting Air Cylinder with enclosed Tie-rods. SMC’s engineered quality gives it a Compact and light design, improved appearance with the enclosed tie-rods, auto-switches can be mounted in the grooves to keep a smooth surface for ergonomic design.

Open PDF
 
KQ2 One Touch Connector Fittings
SMC One-touch fittings come in metric and inch size fittings and are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. SMC offers one touch fittings in a number of special environments such as anti-static, flame resistant, clean room and food service fittings.

Open PDF
 
TIUB Polyurethane Tubing
SMC offers a rainbow of Tubing type, colors, sizes and lengths. 8 colors that are ready to ship with 21 other color options. SMC uses Polyether Type resin, highest quality available to insure the longest possible life.

Open PDF
 
 
 
 
 
 
 
 

SMC Pneumatics

SMC Pneumatics is the largest name in high quality cylinder and rotary actuators suitable for pressure gas powered motion control. AWT stocks actuators providing complete sizing and connection to meet load requirements with certified torque/thrust documentation. Control of full or partial motion, and proportional positioning is possible with a vast line of pneumatic and electro-pneumatic controls and sensors from SMC. AWT offers basic, compact, rodless, guided linear actuator cylinders as well as rotary and gripper types.
 

 
 
Air Prep. & Accessories
SMC also offers a large selection of accessory products, to further compliment our abundant line of cylinders, actuators, and valves . To attach the cylinders we offer rod clevises, mounting brackets and alignment couplers, feedback is provided by the largest selection of auto switches available from any cylinder manufacturer. For speed and action modification we offer shock absorbers, quick exhausts and flow controls in a wide variety of sizes and configurations.

View more Info
 
Cylinders
SMC is a world leader in pneumatic cylinders. Their attention to detail provides all industries with quality, precision air cylinders. Whether large or small, Automation West can provide you what you need!

View more Info
 
Valves
Whether it is for process control, media or automation, AWT stocks a huge number of SMC valves.

 
 
 
 
 
 
 
 

SMC Valves

AWT stocks literally hundreds of pneumatic valves. From the popular VQZ series to the special VXD2 series.
 

 
 
Air Prep. & Accessories
SMC’s innovative line of multi connectors to replace the wiring inside the manifold blocks provides flexibility when adding additional stations or changing the manifold configuration. This line of valve has a 4 position dual 3 port valve option giving you individual control of the A and B ports. Different combinations are available, (N.C./N.O.), (N.O./N.O.), (N.C./N.C.)

Open PDF
 
SY Series Solenoid Valves
SMC’s Line of Solenoid valves have all the options you need for your machine design applications. Space saving with improved flow. Base mounted or Body ported, can be IP67 rated, flexibility with the wiring location and type.

Open PDF
 
SYA Series Solenoid Valves
The SY Air operated 5 port series of valves. Rubber spool technology that comes in base mounted or Body ported design. SMC’s built in fittings can reduce installation time.

Open PDF
 
VQZ Series Solenoid Valves
SMC’s compact, high flow and fast response time 5 way Air Piloted Solenoid Valve. A metal or rubber spool option with ports or built in fittings. Up to IP65, 3 and 5 way body ported can be mounted on the same manifold.

Open PDF
 
VX2 Series Media Valves
SMC’s improved line of Media valves, reduction of power consumption for the DC specifications, with the option of a lower power consumption type. 2 port Media Direct operated for Water, Oil, Steam or Air. Special magnetic material adopted for improvement in Corrosion resistance.

Open PDF
 
VXD2 Series Media Valves
SMC’s Pilot operated 2 Port Solenoid Valve for Water, Oil, and Air. SMC’s improved line of Media valves, Reduction of power consumption for the DC specifications, with the option of a lower power consumption type.

Open PDF